Catalog products

Мережеве обладнання активне With discounts

Sort by:
Filter

Out of stock

The MikroTik 48V2A96W 48V 2A 96W power supply with plug is designed for use with MikroTik products that support 48V output voltage, such as hEX PoE and CRS112-8P-4S-IN.

Out of stock

The MikroTik 48V 1.46A 70W (48POW) power supply is designed to provide equipment manufactured by MikroTiK with a direct current of 48V and a current of 1.46A. The power consumption of the connected device must not exceed 70W.

Out of stock

MikroTik 24HPOW is a powerful 24V 2.5A DC power supply. The device can be used with a Gigabit PoE POE injector to remotely power MikroTik equipment over twisted pair technology using Passive PoE technology.

Out of stock

Mikrotik 18POW - power supply 24 V, 0.8 A, jack 2.1 mm. The power supply is compatible with the entire line of MikroTik RouterBoard routers. It can be used with RBGPOE Gigabit POE Injector.

Out of stock

MikroTik 5VPOW 5V 1A (microUSB) power adapter is designed for MikroTik hAP mini, hAP lite, cAP lite access points.

Out of stock

Hot Swap power supply for CCR1072/2216 and CRS504/CRS518. CCR1072-1G-8S+ and CR2216-1G-12XS-2XQ units are equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order, second one will take over.

Out of stock

5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003).

Out of stock

U.fl-SMA female pigtail, that can be used to connect your Modem (LTE/LoRa/Wireless card) with U.fl connectors to an external antenna.

Out of stock

Out of stock

Out of stock

The Digitus HDMI KVM extender kit consists of a sender unit (local location) and a receiver unit (remote location). The HDMI signal can be extended using a network cable (CAT 6, 5e, 5) to a maximum distance of 120 m. The HDMI signal can also be extended to an unlimited distance over an existing network infrastructure (via an IP connection). The highest video resolution supported is 1080p/60Hz. It also provides convenient computer access (mouse and keyboard) via the receiver's USB ports. It is ideal for industrial, commercial, and public applications.

Out of stock

The VoIP Gateway Yeastar TA800 with 8 FXS ports connects analog phones to IP networks. Support for SIP and IAX2 protocols facilitates integration with IP-PBX systems. One FE LAN port allows local network setup. The TA800 model suits offices with a small number of lines.

Out of stock

Yeastar TA1600 VoIP Gateway — equipped with 16 FXS ports, 1 Fast Ethernet LAN and 1 Fast Ethernet WAN interface, supporting SIP and IAX2 protocols. Designed to connect traditional analog phones and fax machines to modern VoIP networks.

Out of stock

Poly CCX 400 is the super-accessible model in “next-generation” CCX family of phones. Not only is it a breeze to use, it even blocks out background noise to keep your conversations on track. With a 5-inch color touch screen, legendary Poly sound quality, and Android 9-powered performance, you won’t believe it’s our entry-level phone.

Out of stock

Fanvil X4U provides the direct access to instructions with two high-resolution 320x240 color displays, which is an ideal option for enterprises to improve the flexibility and have a greater productivity on daily work. Wideband codec of G.722 and Opus in this device delivers you an immersive HD audio experience in both high band and low band with the network.

Out of stock

Panasonic KX-HDV430RU - videophone with built-in camera, 4.3" color LCD display with touch panel and backlight. The device supports up to 16 lines, is equipped with 2 Gigabit Ethernet ports and supports PoE. There are 24 freely programmable function keys on the phone body, and when connecting 5 KX-HDV20 expansion modules, the user can get more than 224 function keys.

Out of stock

A powerful switch for small and medium-sized businesses, featuring 48 Gigabit Ethernet ports for connecting end devices and 4 10G SFP+ ports for uplink connectivity. Supports physical stacking of up to 9 units, allowing network scalability without compromising performance. Built-in 6kV surge protection on all Ethernet ports ensures stable operation in environments with electrical surges. Zero-Touch Provisioning (ZTP) and Ethernet Ring Protection Switching (ERPS) features provide quick setup and high network reliability. Managed via the Nuclias Network Controller for centralized network management.

Out of stock

A powerful and reliable switch for small and medium-sized businesses, featuring 8 Gigabit Ethernet ports and 2 10G SFP+ ports for uplink connectivity. Supports physical stacking of up to 9 units, allowing network scalability without compromising performance. Built-in 6kV surge protection on all Ethernet ports ensures stable operation in environments with electrical surges. Zero-Touch Provisioning (ZTP) and Ethernet Ring Protection Switching (ERPS) features provide quick setup and high network reliability. Managed via the Nuclias Network Controller for centralized network management.

Out of stock

A powerful switch for small and medium-sized businesses, featuring 16 Gigabit Ethernet ports and 4 10G SFP+ ports for uplink connectivity. Supports physical stacking of up to 9 units, allowing network scalability without compromising performance. Built-in 6kV surge protection on all Ethernet ports ensures stable operation in environments with electrical surges. Zero-Touch Provisioning (ZTP) and Ethernet Ring Protection Switching (ERPS) features provide quick setup and high network reliability. Managed via the Nuclias Network Controller for centralized network management.

Out of stock

A powerful switch for small and medium-sized businesses, featuring 24 Gigabit SFP ports for fiber optic connectivity and 4 10G SFP+ ports for uplink connectivity. Supports physical stacking of up to 9 units, allowing network scalability without compromising performance. Built-in 6kV surge protection on all Ethernet ports ensures stable operation in environments with electrical surges. Zero-Touch Provisioning (ZTP) and Ethernet Ring Protection Switching (ERPS) features provide quick setup and high network reliability. Managed via the Nuclias Network Controller for centralized network management.

Out of stock

The D-Link G403C N300 is a 4G/LTE Wi-Fi router that provides reliable internet access with LTE Cat 4 speeds up to 150 Mbps download and 50 Mbps upload. It supports Wi-Fi 4 (802.11n) with speeds up to 300 Mbps and can connect up to 32 devices simultaneously. Equipped with one WAN/LAN Fast Ethernet port, three LAN ports, and a Nano SIM slot, it offers flexible connectivity.

Out of stock

The D-Link G416C AX1500 is a dual-band 4G/LTE Wi-Fi 6 router that delivers fast and stable connectivity. It supports LTE Cat 6 with speeds up to 300 Mbps download and 50 Mbps upload, along with Wi-Fi 6 speeds up to 1500 Mbps (300 Mbps on 2.4 GHz + 1201 Mbps on 5 GHz). Equipped with one Gigabit WAN/LAN port, three Gigabit LAN ports, and a Nano SIM slot, it ensures flexible networking options.

Out of stock

The Tenda 4G06C N300 is a compact 4G/LTE Wi-Fi router with SIM card support, designed for stable connectivity at home or in small offices. It offers download speeds up to 150 Mbps and Wi-Fi up to 300 Mbps on the 2.4 GHz band. Equipped with one LAN/WAN port, one LAN port, and an RJ11 slot, it ensures flexible connections.

Out of stock

The TE3L uses the latest Wi-Fi 7 technology, with dual-band concurrent rates up to 3600Mbps(5GHz:2882Mbps,2.4GHz 688Mbps). With a dual-core CPU and a 6nm Wi-Fi chip,this router ensures a stable and seamless network experience. Equipped with five high-gain antennas and five built-in FEMs, our Wi-Fi 7 router offers enhanced wall penetration and extended transmission range. It supports the Wi-Fi+ Mesh function to effortlessly provide comprehensive coverage in large households. It also supports a variety of special functions such as NFC one-touch networking, WAN/LAN port auto-negotiation and intelligent diagnosis,easily meeting the needs of various internet scenarios.